cs610 final term new current paper spring July 2011

[Vuhelper]

Question No: 1( Marks: 1 ) - Please choose one

A ---------- relies on the hardware manufacturer to assign a unique physical address to each network interface.

► Static addressing scheme
► Configurable addressing scheme
► Dynamic addressing scheme
► None of the given

Question No: 2 ( Marks: 1 ) - Please choose one

An interface for thin Ethernet must have an ____________ connector , and must enerate signals according to the_____________ specification.

► RJ-45, 10 Base T
► RJ-45, 10 Base 5
► BNC, 10 Base 2
► BNC, 10 Base T

Question No: 3( Marks: 1 ) - Please choose one

A system with redundant bridges might have a problem with_______ in the system.

► Loop
► Filters
► Spanning Trees
► All given choices

Question No: 4( Marks: 1 ) - Please choose one
A Bridge can ________
► Filter a frame
► Forward a frame
► Extend a LAN
► Do all the above

Question No: 5( Marks: 1 ) - Please choose one
________ is used for typical data applications (where the data rate may be unknown and bursty) and allows use of whatever bandwidth is available at a given time.
► Constant Bit Rate (CBR) service
► Variable Bit Rate (VBR) service
► Available Bit Rate (ABR) service
► None of the given

Question No: 6( Marks: 1 ) - Please choose one

ATM assigns each VC a _____________ identifier that is divided two parts to produce a hierarchy.
► 21-bit
► 22-bit
► 23-bit
► 24-bit
The VC is identified by a 24-bit value formed from the VPI or Virtual Path Indicator (8-
bit),
Question No: 7( Marks: 1 ) - Please choose one

________ of TCP/IP layering model, corresponds to basic network hardware.

► Physical Layer
► Network Interface Layer
► Internet Layer
► Transport Layer

Question No: 8( Marks: 1 ) - Please choose one
_________ places the boundary between the second and third octets

► Class A
► Class B
► Class C
► Class D
the primary classes use octet boundaries to partition an address into prefix and suffix. Class A places the boundary between the first and second octets. Class B places the boundary between the second and third octets, and class C places the boundary between the third and fourth octets.

Question No: 9( Marks: 1 ) - Please choose one

UDP and TCP are both_________ layer protocols

► Physical
► Data link
► Network
► Transport

Question No: 10( Marks: 1 ) - Please choose one

Connection-oriented service, Point-to-point, Complete reliability, Full-duplex communication, Stream interface, Reliable connection startup and Graceful connection shutdown are the services provided by__________

► IP
► None of the given
► TCP
► UDP

Question No: 11( Marks: 1 ) - Please choose one
_______ protocols of TCP/IP layering model specify how to ensure reliable transfer.
► Physical Layer
► Network Interface Layer
► Internet Layer
► Transport Layer

Question No: 12( Marks: 1 ) - Please choose one

________identifies which application program on receiving computer should receive the data

► Logical address
► Source port
► Destination Port
► None of the given

Question No: 13( Marks: 1 ) - Please choose one
________ identifies the application program that sent the data.

► Destination Port
► Source port
► Logical address
► None of the given

Question No: 14( Marks: 1 ) - Please choose one

Which of the following are interior routing protocols?

► RIP
► OSPF
► BGP
► RIP and OSPF
Most common routing protocols, such as RIP and OSPF, are interior routing protocols. The basic routable element is the IP network or subnetwork
Question No: 15( Marks: 1 ) - Please choose one

The Border Gateway Protocol (BGP) uses_________ for all communication

► UDP
► TCP
► Both UDP and TCP
► None of the given
Border Gateway Protocol (BGP) uses TCP sockets to communicate with other routers. Consequently, the groundwork to make BGP highly available

Question No: 16( Marks: 1 ) - Please choose one
__________measures distance in network hops, where each network between the source and destination counts as single hop.

► BGP
► OSPF
► RIP
► None of the given
RIP measures distance in network hops, where each network between the source and destination counts as a single hop
Question No: 17( Marks: 1 ) - Please choose one

OSPF is based on____

► Distance vector routing
► Link state routing
► Path vector routing
► Distance vector routing and Link state routing

SPF is based on link-state technology that has several advantages over distance-vector protocols such as RIP: no hop count limitations
Question No: 18( Marks: 1 ) - Please choose one

_________ performs local multicast and uses IP-in-IP encapsulation to send multicast datagrams from one site on the Internet to another.

► Distance Vector Multicast Routing Protocol (DVMRP)
► Core Based Trees (CBT)
► Protocol Independent Multicast_ Sparse Mode (PIM-SM)
► Protocol Independent Multicast _ Dense Mode (PIM-DM)
DVMRP performs local multicast and uses IP-in-IP encapsulation to send multi cast data grams from one site on the Internet to another

Question No: 19( Marks: 1 ) - Please choose one
The length of time required to send a variable length packet is variable and does not require a complicated interrupt scheme to detect completion of transmission.

► True
► False
The length of time required to send a variable length packet is variable and requires complicated interrupt scheme to detect completion of transmission
Question No: 20( Marks: 1 ) - Please choose one

NEXT HEADER field in the base header defines type of header and it appears at end of fixed-size base header.

► True
► False
NEXT HEADER field in the base header defines type of header and it appears at end of fixed-size base header. Some extension headers are

Question No: 21( Marks: 1 ) - Please choose one

Although message exchange can be used to bind addresses, sending a request for each binding is hopelessly inefficient.

► True
► False
CASHING ARP RESPONSES:
Although message exchange can be used to bind addresses, sending a request for each binding is hopelessly inefficient.

Question No: 22( Marks: 1 ) - Please choose one
Address mask defines how many bits of address are in suffix?

► True
► False
Next hop stored as IP address of router
Address mask defines how many bits of address are in prefix
Prefix defines how much of address used to identify network

Question No: 23( Marks: 1 ) - Please choose one
A computer attached to a given network can only communicate with other computers attached to the same network. Is this a problem with multiple networks?
► True
► False
The chief problem with multiple networks is obvious:
A computer attached to a given network can only communicate with other computers attached to the same network
The problem became evident in the 1970s as large organizations began to acquire multiple networks
Each network in the organization formed an island

Question No: 24( Marks: 1 ) - Please choose one

In the 1970s large organizations began to acquire multiple networks. Each network in the organization formed island. Employees needed to choose a computer appropriate for each task. So they needed multiple screens, keyboards and computers.

► False
► True

Question No: 25( Marks: 1 ) - Please choose one

The term self-identifying is used for Classful IP addresses because the class of the address can be computed from the address__________.
► itself
► prefix
► suffix
► mask
Classful IP addresses are self-identifying because the class of the address can be computed from the address itself.

Question No: 26( Marks: 1 ) - Please choose one

In which method of Address Resolution Protocol the protocol address independent of hardware address?
Were "T" stands for Table lookup, "C" for Closed-form Computation and "D" for Data Exchange?
► T, C
► D
► C
► T, D
Page 94

Question No: 27( Marks: 1 ) - Please choose one

In which method of Address Resolution Protocol the protocol address is determined by hardware address?
Were "T" stands for Table lookup, "C" for Closed-form Computation and "D" for Data Exchange?
► T
► D
► C
► T, C
Page94

Question No: 28( Marks: 1 ) - Please choose one

Reconstruction of original datagram is called reassembly.

► True
► False
Reconstruction of original datagram is call reassembly; Ultimate destination performs reassembly; Fragments may arrive out of order;
Question No: 29( Marks: 1 ) - Please choose one

A computer needs a complete stack of protocols to run either a client or a server.

► True
► False

Question No: 30( Marks: 1 ) - Please choose one

TCP uses _______ mechanism to control the flow of data.

► door
► window
► acknowledgment
► retransmission
TCP uses a window mechanism to control the flow of data and prevent data overrun
Each end of the connection allocates a buffer and notifies the other end of its size